Firmware Update; Firmware Update Through Sd-Card - Mutable Instruments Ambika Manual

Firmware update

Firmware update through the SD-card
From the library page:
pt 1 program .A000 junon
| init | send | save | versions
Press S7 to display more commands:
pt 1 program .A000 junon
pref | >ini | about
Press S3 to bring the about page:
ambika
upgrade U
The first half of the screen displays the version of the OS running on the motherboard. If a
firmware update file named AMBIKA.BIN is present on the memory-card, pressing S1
(*upgrade* command) will load it to upgrade the main processor.
Ambika contains seven ports to which devices are attached. The first 6 ports
(port 1 to port 6) are used for connecting the voicecards ; the last port (port 7)
is used for connecting additional controllers or I/O connectors. The second
half of the screen on the about page shows the device type and OS version
number for a selected port. Use the encoder to scroll through the ports.
When no device is attached to a port (or when the device firmware has been
corrupted), a '?' is shown in place of the device type. If a firmware update file
named VOICE$.BIN (where $ is the port number) is present on the memory
card, pressing S4 (upgrade command) will load it to upgrade the voicecard
processor.
v1.0 | port 1
__ | upgrade
more | exit
more | exit
device 1
37
v1.0
exit