Dumping Programs/Multis/Sequences/Patches As Sysex; Saving Programs/Multis/Sequences/Patches - Mutable Instruments Ambika Manual

Dumping programs/multis/sequences/patches as SysEx

Press S3 (*send* command) on the library page to send the selected object on the MIDI
output, encoded in SysEx messages. Note that programs are sent as 2 messages (1 block
with synthesis settings and 1 block with part settings) ; and multi are sent as 13
messages ; so you need to set your SysEx Librarian program to receive many messages.

Saving programs/multis/sequences/patches

After having selected with S1 which object type you want to save (multi, program, etc.),
press S4 (*save* command).
pt 1 program .A000 junon
| init | send | save | versions
Before saving a program/multi/sequence/patch, its bank letter, number and name must
be set. Use the encoder to increment/decrement the value or letter at the cursor. To move
the cursor, click the encoder, turn it to move the cursor, and click it again.
When you are done, press S7 (*save* command). If you want to cancel the operation, press
S8 (*cancel* command).
A warning will be displayed in case the memory card is damaged,
full, incorrectly formatted, or just needs a little blow on its
connectors.
Note that when a patch is overwritten, a backup copy of the previous version
is kept. You can use a SD-card reader on your personal computer to remove
the latest version of the patch and restore the backup copy (Sorry... Ambika
does not come with its own version of Norton Commander).
35
save | cancel