Selecting An Object; Loading Programs/Multis/Sequences/Patches; Reinitializing Programs/Multis/Sequences/Patches - Mutable Instruments Ambika Manual

Selecting an object

Press S1 to repeatedly cycle through the different types of items that can be loaded/
written from/to the memory card:
• pt N patch will load/save all the sound synthesis settings, but not the sequencer/
arpeggiator parameters of the Nth part.
• pt N sequence will load/save all the sequencer/arpeggiator settings of the Nth part.
• pt N program will load/save all the settings of the Nth part (synthesis, arpeggiator
and sequencer).
• multi will load/save all the settings of all parts.
Remember that you can hold S1 while turning the encoder to change the active part.
Ambika can store 3328 (26 banks of 128) patches/sequences/programs/multis.

Loading programs/multis/sequences/patches

Turn the encoder to move to the previous/next program. Remember that you can hold S8
while turning the encoder to scroll faster in the list. To change the current bank:
• Click the encoder. The bank letter starts blinking.
• Turn the encoder to select a bank.
• Click the encoder when you are done.

Reinitializing programs/multis/sequences/patches

Press S2 (*init* command) to reinitialize or randomize the select object. This brings the
following confirmation page:
pt 1 program
| init | send | save | version
Turn the encoder to select an action (randomize will replace all settings by random values;
while initialize will replace all settings by the values they had at startup). Press S7 to
confirm, or S8 to cancel the initialization.
34
[ randomize
yes | no
]