Table of Contents
Advertisement
If the door is not closed within 4 seconds, the machine will not start. In this case; to start the selected
program, the door must be opened, the Start/Pause key must be pressed and the door must be closed again
within 4 seconds after the Start/Pause key is pressed.
If the door of the machine is opened when the machine is running, the machine stops working. If the door is
closed back within 4 seconds after the door is opened, the machine will continue.
If the door stays open for more than 4 seconds, Start/Pause key must be pressed and the door of the
dishwasher must be closed within 4 seconds after the Start/Pause key is pressed.
AUXILIARY FUNCTIONS
The washing programs of the dishwasher are designed to obtain the best cleaning effect, considering the
degree of soiling and properties of the dishes to be washed. Auxiliary functions are provided in order to to
save time, water and energy and to wash using conditions specific to you.
Auxiliary functions may cause changes in the program duration, and are not suitable for all washing
programs. If a selected function is not compatible with the program, the indicator will not light, and the
dishwasher will emit a sound to inform you that the function will not be used.
To add an auxiliary function to the wash program:
1. Press the 'Program' to select the desired washing program.
2. Once the washing program is selected, press the 'Options' or 'Half Load' buttons until the desired
functions corresponding LED indicator is lit. To select 'Hi-Temp', press and hold the 'Options' button
for 3 seconds.
3. To cancel auxiliary functions, press the 'Options' or 'Half Load' buttons until the LED indicators are
no longer lit.
FUNCTIONS:
• Sanitize Function: The Sanitize function raises the water temperature in the final rinse.
• Extra Fast Option: Select the Extra Fast option to decrease the duration of a washing program,
reducing water and power usage.
• Extra Dry Function: Increases the drying function at the end of the wash program.
• Hi-Temp Function: When this option is selected, both the water temperature and the wash time are
increased.
• Half Load Function: Washes either the upper or lower basket. Use when there aren't enough dishes
to fill the dishwasher.
SETTING THE DELAY WASH TIMER
The Delay Wash Timer can be used to set the dishwasher to turn on and start washing at a later time if needed.
The wash program can be set to delay up to 19 hours in increments of 1 hour.
To set the delayed start function:
1. Select the program and auxiliary functions desired, then press the 'Delay/Cancel' button. The display
will alternate between "1h" (indicating to delay the start of the wash program for 1 hour) and the
selected wash program duration.
2. Press the 'Delay' button to increase the delay time as needed. Each time you press the button, the time
will increase by 1 hour.
3. Once you have set the number of hours to delay the wash start, press the 'Start/Pause' button and be
sure to close the dishwasher door within 4 seconds.
NOTE: If the dishwasher door is opened while the Delay wash is active, the Delay timer will resume when the
door is closed
17
Advertisement
Table of Contents
