Table of Contents
Advertisement
BASKET HEIGHT SETTING
In certain models, the height setting of the upper rack may be changed using the wheels which are present at
two height levels.
CAUTION: Make sure that the rack is empty. Changing the height setting while the rack contains tableware
could cause the contents to dislodge, causing personal injury or damage to the tableware.
1. Release the latches on both the right and left tracks of the upper rack by turning them to the outside
(Fig. 12 - A).
2. Pull the track out completely (Fig. 12 - B).
3. Place the rack into the tracks again at the desired height (Fig. 12 - C).
4. Push the latches back into the correct position.
CHANGING BASKET HEIGHT WHEN FILLED
The upper basket includes a mechanism which enables the height of the basket to be adjusted up or down
without having to remove the basket. Hold the basket on both sides and pull it up or push it down, ensuring both
sides of the upper basket are in the same position.
LOWER BASKET FOLDING RACKS
The vertical stems on the lower rack
can be folded down if needed to
allow for easier placement of larger
items.
NOTE: Bringing the wires to the
horizontal position by holding them
from the tips may cause them to
bend.
Carefully bring the wires in the middle to horizontal or vertical position by holding them from their stems and
pushing.
B
A
14
Figure 12
C
Figure 13
Figure 14
Advertisement
Table of Contents
