Adjusting The Number Of Prints - Lexmark 310 User Manual

Adjusting the number of prints

1
Load photo paper.
2
Insert a memory card.
Note: If you are unsure of what type of memory card you have,
The I Want To... menu appears with View Photos or Print
highlighted.
3
Press
Select
4
Press the right or left arrow buttons to scroll to the photo you want
to adjust.
5
Press
Number Of Prints
To adjust the number of prints of other photos, repeat steps 4 and 5.
6
Press
Start
If Preview before Print is on, a preview of the print job is first displayed.
Press again to print the photo.
Start
If Preview before Print is off, the photo prints immediately.
Note: To adjust the Preview setting, see page 23.
see page 11.
.
until you reach the desired quantity.
to print the photo(s).
20