Lexmark 310 User Manual page 37

Symptom
Poor quality at the edges
of the page
Printer does not print or
respond
Slow print speed
Diagnosis
Are you using the correct
paper size with the size
you selected in the
printer?
Is the printer on?
Do you see an error
message?
Is the print cartridge
installed properly?
Are you using the highest
print quality resolution?
39
Solution
The printer supports
three paper sizes: 4x6,
A6, and Hagaki.
1 Verify the paper size
you are using.
2 Verify the printer
setting matches your
paper size. See
"Changing the blank
paper size" on
page 22.
Press the Power button.
If the Power light does
not come on, see "The
Power light is not lit" on
page 37.
See "Error messages
troubleshooting" on
page 45.
Remove the print
cartridge, check for
transparent tape and
then reinsert. See
"Replacing the print
cartridge" on page 31.
Reduce the print quality
resolution. See
"Changing the print
quality" on page 23.
Note: Draft and Normal
print more quickly than
Best.