Adjusting The Brightness - Lexmark 310 User Manual

If Preview before Print is off, the photo prints immediately.
Note: To adjust the Preview setting, see page 23.

Adjusting the brightness

1
Load photo paper.
2
Insert a memory card.
Note: If you are unsure of what type of memory card you have,
The I Want To... menu appears with View Photos or Print
highlighted.
3
Press
Select
4
Press the right or left arrow buttons to scroll to the photo you want
to adjust.
5
Press
Menu
The Photo menu appears.
6
Press the down arrow button until you highlight Brightness.
7
Press
Select
8
Press the right or left arrow buttons to adjust the brightness of the
photo.
9
Press
Select
To adjust other photos, repeat steps 4–9.
10
Press
Start
If Preview before Print is on, a preview of the print job is first displayed.
Press again to print the photo.
Start
If Preview before Print is off, the photo prints immediately.
Note: To adjust the Preview setting, see page 23.
see page 11.
.
.
.
to accept your changes.
to print the photo(s).
19