Download Print this page

Removing And Fitting The Battery - Stihl HSA 50 Instruction Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24

7 Removing and Fitting the Battery

temperature. The actual charging time may differ
from the specified charging time. For specified
charging times see www.stihl.com/charging-
times.
The charging process starts
automatically when the plug is
inserted in a wall outlet and the
battery is fitted in the charger.
The charger switches itself off
automatically when the battery is
fully charged.
The battery and charger become hot during the
charging process.
2
4
1
► Insert the plug (6) in a convenient wall outlet
(7).
The charger (3) runs a self test. The LED (4)
glows green for about 1 second and then red
for about 1 second.
► Fit the connecting cable (5).
► Insert the battery (2) in the guides in the
charger (3) and press it home as far as stop.
The LED (4) glows green. The LEDs (1) glow
green and the battery (2) is being charged.
► If the LED (4) and the LEDs (1) stop glowing:
The battery (2) is fully charged and can be
taken out of the charger (3).
► If the charger (3) is no longer required. Dis‐
connect the plug (6) from the wall outlet (7).
6.3
State of Charge
1
► Press the button (1).
0458-018-9801-A
3
7
6
5
80-100%
60-80%
40-60%
20-40%
0-20%
The LEDs (5) glow green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.4
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
17.
There is a malfunction in hedge trimmer or
battery.
6.5
LED on Charger
The LED indicates the operating status of the
charger.
If the LED glows green, the battery is being
charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
7
Removing and Fitting the
Battery
7.1
Inserting the Battery
1
2
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
The arrows (3) on the battery (1) are still visi‐
ble and the battery (1) is held securely in the
battery compartment (2). There is no electrical
contact between the hedge trimmer and bat‐
tery (1).
► Insert the battery (1) into the battery compart‐
ment (2) as far as it will go.
The battery (1) engages with a second click
and is flush with the hedge trimmer's housing.
7.2
Removing the Battery
► Place the hedge trimmer on a level surface.
English
3
33

Advertisement

loading