Ec Declaration Of Conformity; Ukca Declaration Of Conformity; General Power Tool Safety Warnings; Introduction - Stihl HSA 50 Instruction Manual

English
21 EC Declaration of Con‐
formity
21.1 STIHL HSA 50.0 Hedge Trim‐
mer
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
– Category: Cordless hedge trimmer
– Manufacturer's brand: STIHL
– Model: HSA 50.0
– Serial number: 4521
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014-1, EN 55014-2, EN 62841-1 and
EN 62841-4-2.
Applied conformity assessment procedure in
accordance with Directive 2000/14/EC, Annex V.
– Measured sound power level: 89 dB(A)
– Guaranteed sound power level: 91 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are shown on the hedge trim‐
mer.
Waiblingen, 2022-03-15
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
22 UKCA Declaration of Con‐
formity
22.1 STIHL HSA 50.0 Hedge Trim‐
mer
40

21 EC Declaration of Conformity

ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
– Category: Cordless hedge trimmer
– Manufacturer's brand: STIHL
– Model: HSA 50.0
– Serial number: 4521
conforms to the relevant provisions of UK regula‐
tions The Restriction of the Use of Certain Haz‐
ardous Substances in Electrical and Electronic
Equipment Regulations 2012, Supply of Machi‐
nery (Safety) Regulations 2008, Electromagnetic
Compatibility Regulations 2016 and Noise Emis‐
sion in the Environment by Equipment for use
Outdoors Regulations 2001 and has been manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014-1, EN 55014-2, EN 62841-1, and
EN 62841-4-2.
Applied conformity assessment procedure in
accordance with UK regulations Noise Emission
in the Environment by Equipment for use Out‐
doors Regulations 2001 Schedule 8.
– Measured sound power level: 89 dB(A)
– Guaranteed sound power level: 91 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture
and serial number are shown on the hedge trim‐
mer.
Waiblingen, 2022-03-15
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
23 General Power Tool Safety
Warnings
23.1

Introduction

This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
0458-018-9801-A