Table of Contents
Advertisement
7.
Device Configuration
You will need the
Kaiterra Enterprise Configuration Tool
in order to complete the
configuration process.
When the Sensedge Mini is powered on, the device will enter Configuration Mode for 15
minutes, which will be indicated by a flashing status light on the device. This configuration
mode causes the Sensedge Mini to broadcast a WiFi Access Point signal, allowing you to
connect directly to the device.
Open up the Kaiterra Enterprise Configuration Tool and connect to the WiFi signal with
"Kaiterra" at the start of its name (SSID). If multiple Sensedge Minis are being configured at
once, there may be multiple WiFi signals appearing with a similar SSID. You can find the
correct SSID printed on the front of the device above the sensor module bays.
Once connected, click "Configure" on the Configuration Tool, which will then show your
device's details, including the device's Unique Identifier (UDID).
Page 25
Advertisement
Table of Contents
