Netware - Lexmark X646E Menus And Messages Manual

Menu item Purpose
Honor DSR Determines whether the MFP uses
the Data Set Ready (DSR) signal.
DSR is one of the handshaking
signals for most serial interface
cables.
The serial interface uses DSR to
distinguish data sent by the
computer from data created by
electrical noise in the serial cable.
This electrical noise can cause stray
characters to print. Select On to
prevent stray characters from
printing.

NetWare

Use these menu items to view or change the printer NetWare settings.
Menu item Purpose
View Login Shows the field used to assign the
Name NetWare login name.
View Print Mode Assigns the NetWare print mode.
View Network Shows the field used to assign the
Number NetWare number.
Activate Activates or deactivates the
NetWare feature.
Ethernet 802.2 Sets the Ethernet 802.2 value On or
Off.
Ethernet 802.3 Sets the Ethernet 802.3 value On or
Off.
Ethernet Type II Sets the Ethernet Type II value On
or Off.
Ethernet SNAP Sets the Ethernet SNAP value On
or Off.
Packet Burst Sets the Packet Burst value On or
Off.
NSQ/GSQ Mode Sets the NSQ/GSQ Mode value On
or Off.
Using the MFP menus
Values and descriptions
Off*
On
Values and descriptions
text entry
Enter the Login Name. Thereafter, select Login Name to show
the NetWare name on the control panel.
Pserver*
Rprinter
text entry
Enter the Netware number. Thereafter, select View Network
Number to show the NetWare network number on the control
panel.
Off
On*
On*
Off
On*
Off
On*
Off
On*
Off
On
Off*
On
Off*
Network/Ports
43
All data received by the serial port is
treated as valid data.
Only data received while the DSR
signal is high is treated as valid.
Off—Deactivates the NetWare feature.
On—Activates the NetWare feature.
IPX Frame Types, which allow the
adapter to initiate conversations, are
used.
This is the broadcast search method
on the Web pages.