Lexmark X646E Menus And Messages Manual page 110

Message
Memory full, cannot
print faxes
Reattach bin [x]
Reattach bins [x]–[y]
Reattach envelope feeder The MFP detects that the optional
Remove paper from all
bins
Remove paper from bin
[x]
Remove paper from
[linked set bin name]
Remove paper from
standard output bin
Understanding MFP messages
Meaning
The attempt to print the fax jobs is
automatically canceled. The Fax code
recognizes that the fax job is
canceled and does not delete pages
in the fax job that have not printed.
The Fax code does not attempt to
reprint the fax causing the memory
error until the MFP goes through a
power on reset.
The MFP detects that output bin [x] is
missing or installed incorrectly, where
x is the number of the bin. This
message occurs when pages are
formatted when the bin is present, but
before the pages are printed.
Between the formatting and printing
time, the optional bin is removed from
the MFP.
The MFP detects that output bins x–y
are missing or installed incorrectly,
where x and y are the numbers of the
first and last bin in a group. For
instance, if the MFP supported 10
bins, the message would list Bin 1 -
Bin 10 even though all 10 bins are
affected. This message occurs when
pages are formatted when the bin is
present, but before the pages are
printed. Between the formatting and
printing time, the optional bin is
removed from the MFP.
envelope feeder is missing between
the time the job processes, and when
it prints. Sometime during processing,
the optional envelope feeder is
removed.
All output bins are full.
The specified output bin is full.
The linked set of output bins
previously defined with a specific
name by the user or system support
person is full.
The standard output bin is full of print
media.
Attendance messages
110
Action
Touch Continue to clear the message.
Turn the MFP off and then on to reset it.
• Touch Continue to clear the message and
continue normal operation without using the
specified output bin.
• Turn the MFP off, unplug the power cord from
the wall outlet, reattach the specified bin,
connect the power cord to a properly
grounded outlet, and then restart the MFP.
• Touch Reset Active Bin to change to another
linked set of bins.
• Touch Continue to clear the message and
continue normal operation without using the
specified output bin.
• Turn the MFP off, unplug the power cord from
the wall outlet, reattach the specified bin,
connect the power cord to a properly
grounded outlet, and then restart the MFP.
• Touch Reset Active Bin to change to another
linked set of bins.
Touch Cancel Job to clear the message and
continue without using the optional envelope
feeder.
Install the optional envelope feeder.
Remove the print media from all output bins.
The MFP automatically senses print media
removal and resumes printing.
If removing the print media does not clear the
message, touch Continue.
Remove the stack of paper from the specified
bin. The MFP automatically senses print media
removal and resumes printing.
If removing the print media does not clear the
message, touch Continue.
Remove the print media from all the linked
output bins. The MFP automatically senses print
media removal and resumes printing.
If removing the print media does not clear the
message, touch Continue.
Remove the stack of print media from the bin to
clear the message and resume printing.
Touch Continue to make the MFP recheck the
output level in the standard output bin.