This menu is available from the Network/Ports menu:
Network/Ports Network <x> Net <x> Setup Wireless
Menu item
Network Mode
Infrastructure
Ad hoc
Compatibility
802.11n
802.11b/g
802.11b/g/n
Choose Network
<list of available networks>
View Signal Quality
View Security Mode
AppleTalk menu
Menu item
Activate
Yes
No
View Name
View Address
Set Zone
<list of zones available on the
network>
NetWare menu
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup NetWare
Menu item
Activate
Yes
No
Description
Specifies the network mode
Notes:
•
Infrastructure mode lets the printer access a network using an access
point.
•
Ad hoc is the factory default setting. Ad hoc mode configures the
printer for wireless networking directly between it and a computer.
Specifies the wireless standard for the wireless network
Lets you select an available network for the printer to use
Lets you view the quality of the wireless connection
Lets you view the encryption method for the wireless connection.
"Disabled" indicates that the wireless network is not encrypted.
Description
Activates or deactivates AppleTalk support
Note: Yes is the factory default setting.
Shows the assigned AppleTalk name
Shows the assigned AppleTalk address
Provides a list of AppleTalk zones available on the network
Note: The factory default setting is the default zone for the network. If no default
zone exists, the zone marked with an * is the factory default setting.
Description
Activates NetWare support
Note: No is the factory default setting.
Understanding printer menus
172