Memory Card Reader And Pictbridge Troubleshooting - Lexmark X5470 User Manual

A
RE YOU LOADING THE PAPER CORRECTLY
For more information, see "Loading paper" on page 6.
Note: Do not force paper into the printer.

Memory card reader and PictBridge troubleshooting

Memory card cannot be inserted
These are possible solutions. Try one or more of the following:
C
HECK MEMORY CARD TYPE
Make sure that the type of memory card you are using can be used in the printer.
C
HECK MEMORY CARD PLACEMENT
Make sure you have inserted the memory card in the correct slot.
Nothing happens when memory card is inserted
These are possible solutions. Try one or more of the following:
R
EINSERT THE MEMORY CARD
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
C
HECK MEMORY CARD PLACEMENT
Make sure you have inserted the memory card in the correct slot.
C
HECK MEMORY CARD TYPE
Make sure that the type of memory card you are using can be used in the printer.
C
HECK TO SEE IF THE MEMORY CARD IS DAMAGED
Check that there is no obvious damage to the memory card.
C
HECK TO SEE IF THE MEMORY CARD CONTAINS PHOTOS
Insert a memory card that contains photos. The printer will read photos created using the JPEG format. For more
information, see the documentation that came with the digital camera.
M USB
AKE SURE THE
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
?
CABLE IS CONNECTED
Troubleshooting
169