Parallel Port Irq; Parallel Port Dma Channel; On-Board Ide - MSI MS-5153 Manual

CHAPTER 4 CHAPTER 4
CHAPTER 4 CHAPTER 4 CHAPTER 4

Parallel Port IRQ

If the on-board parallel mode is not on auto mode, the user can
select the interrupt line for on-board parallel port. We suggest that the user
select the interrupt for the onboard parallel port as shown below:
On-board parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)

Parallel Port DMA Channel

This option allows user to choose DMA channel 1 to 3 for the on-
board parallel port on ECP mode.

On-board IDE

Set this option to enable or disable on-board IDE controller.
®
AMI AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE BIOS USER'S GUIDE
AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE
Parallel Port IRQ
7
5
5
4-24