Parallel Port DMA
This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can
select the interrupt line for onboard parallel port. We suggest that the user
select the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)
Onboard AC'97 Modem
This item allows you to decide to enable/disable the Intel 810
chipset family to support AC97 Modem. The settings are Enabled, Disabled.
®
Parallel Port IRQ
7
5
5
3-23