Using The Scan Menu - Lexmark X3550 Getting Started

Use this
Copies*
Resize*
Lighter / Darker*
Quality*
Paper Setup
Repeat Image*
Collate
N-Up*
Original Size*
Original Type*
* Temporary setting. For information on saving temporary and other settings, see "Saving settings" on
page 35.

Using the Scan menu

To access and navigate the Scan menu:
1
From the control panel, press Scan Mode.
The scan default screen appears.
2
Press or repeatedly until the scan destination you want appears.
3
If you do not want to change a setting, press Start Color or Start Black.
4
If you want to change a setting, press
5
Press or repeatedly until the menu item you want appears.
6
Press .
7
Press or repeatedly until the submenu item you want or the setting you want appears.
8
Press .
Note: Pressing selects a setting. An * appears next to the selected setting.
9
To go into additional submenus and settings, repeat step 7 and step 8 as needed.
10
If needed, press
11
Press Start Color or Start Black.
To
Specify how many copies to print.
•
Specify the percentage for enlarging or reducing the original copy.
•
Specify a specific copy size.
•
Create a multiple-page poster.
Adjust the brightness of a copy.
Adjust the quality of a copy.
Specify the size and type of the paper loaded.
Choose how many copies of an image to print on a page.
Print one or more copies in the correct order.
Choose how many pages to print on a page.
Specify the size of the original document.
Specify the type of the original document.
.
repeatedly to return to the previous menus and make other setting selections.
30