Uninstalling And Reinstalling The Software - Lexmark X3550 Getting Started

7
Press .
The following message appears: This will reset all wireless network settings. Are you
sure?
8
Press or repeatedly until Yes appears.
9
Press .
Clearing wireless settings appears.
Notes:
•
It may take 30-60 seconds for the settings to be cleared.
•
The Wi-Fi indicator light will turn to orange.

Uninstalling and reinstalling the software

If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to uninstall and reinstall the printer software.
For Windows users:
1
Disable any anti-virus program.
2
Click Start Programs or All Programs
3
Select Uninstall.
4
Follow the instructions on the computer screen to remove the printer software.
5
Restart the computer before reinstalling the printer software.
6
Insert the CD for Windows, and then follow the instructions on the computer screen to reinstall the software.
Note: If the install screen does not appear automatically after you restart your computer, click Start
then type D:\setup.exe, where D is the letter of your CD-ROM drive.
For Macintosh users:
1
Close all open software applications.
2
From the Finder desktop, double-click the Lexmark 3500-4500 Series folder.
3
Double-click the Uninstaller icon.
4
Follow the instructions on the computer screen to remove the printer software.
5
Restart the computer before reinstalling the printer software.
6
Insert the CD for Macintosh.
7
From the Finder desktop, double-click the Lexmark 3500-4500 Series Installer icon.
8
Double-click the Install icon.
9
Follow the instructions on the computer screen to reinstall the software.
Lexmark 3500-4500 Series.
66
Run, and