UI Element
Apply
Video
HDMI OUT RESOLUTION
UI Element
Resolution
OUTPUT HDCP
UI Element
Output HDCP
Hall Technologies
November 8, 2022
Description
RS232 commands, the word "Standby" appears in the middle of the Guide
Screen.
•
If it's set to 0 minute, it means this function is disabled and you cannot set the
device to standby mode.
By default, auto standby is set as 1 minute.
Click to apply setting changes.
Description
Set the output resolution for HDMI Out. Two operation methods are offered.
Auto: select to output the maximum resolution supported by display based on
the display's EDID. E.g. If display supports up to 4K@60Hz, the device outputs
4K@60Hz.
Resolution range list: select a desired output resolution from the drop-down
menu to output this fixed resolution.
By default, it's set as Auto.
Description
Set the HDCP capability for HDMI Out and HDBT Out.
Follow: Set the output HDCP of HDMI Out to follow the HDCP capability of the
video input.
HDCP 1.4: Set the output HDCP of HDMI Out to HDCP 1.4.
By default it is set as Follow.
Page 23 of 30