Applications - Hall Technologies HT-ODYSSEY User Manual

Byod conference speakerphone with presentation switch and wireless casting
Table of Contents

Advertisement

ID
Name

Applications

APPLICATION 1: BYOD OR ZOOM ROOM
APPLICATION 2: ZOOM ROOM ONLY WITH BYOD CONTENT SHARING
1. In the "Zoom Room Only" Application the Zoom Room PC gets the Odyssey mics through
the USB Micro to USB-A connection
2. In the "Zoom Room Only" Application the USB-C or HDMI inputs will only route video and
audio out to the Zoom capture card for content sharing. The USB-C will get the Odyssey mics
or camera. Switching to HDMI will not switch the USB from the Zoom PC.
3. When switching the scenario, a device reboot is needed to apply the settings. (Using Web UI
or API commands to switch the scenario, refer to "Web UI" section or the separate document
"API Command Set HT-ODYSSEY".)
Note: After the speakerphone is connected to a laptop using the included USB-A to USB-B Mini
cable, the speakerphone can be detected by the system.
• Speaker: HT-ODYSSEY
• Mic: HT-ODYSSEY
• Wi-Fi: HT-ODYSSEY
Hall Technologies
November 8, 2022
Description
Connect to a USB-C video source (e.g. laptop) for video input using the USB
Type-C cable provided.
You can also use either of the following suggested cables:
USB Type-C to USB 3.0 Type-A cable;
USB Type-C to Type-C cable (USB 3.1 Gen 1 or above).
Page 8 of 30

Advertisement

Table of Contents
loading

Table of Contents