SYSTEM
UI Element
Factory Default
Reboot
FIRMWARE VERSION
Firmware version shows the current firmware in use.
Hall Technologies
November 8, 2022
Description
Click to restore the device to its factory defaults.
Note: There are two additional ways to perform a factory reset:
1.
Press and hold the Mic Mute & Power buttons on the top panel for 5 seconds. When this
command is received all LED lights will flash quickly two times and the HT-ODYSSEY will
factory reset.
2.
Send the API command "gbcontrol --reset-to-default". (For more information, see the
separate API document.)
Click to restart the device.
Page 27 of 30