Hall Technologies HT-ODYSSEY User Manual page 7

ID Name
1 Speaker
2 Source Switch Button
3 LED
Power Button (Video
4
Mute)
5 Status LED
BYOD ON/OFF Button
6&7
& LEDs
8 Volume Up Button
9 Mute Mic Button
10 Volume Down Button
11 Mic
12 Pairing
13 DC 24V
14 LAN
15 HDBT Out
16 HDMI Out
17&18 HDMI IN &USB-B
19 USB 3.0
20 USB-C
Hall Technologies November 8, 2022
Description
Outputs audio of input source.
Press to select the source:
Ÿ AUTO: When there is no wire source or only showing Wireless source
(default).
Ÿ HDMI: Select HDMI source with USB host
Ÿ TYPE-C: Select Type-C source with USB host
Ÿ AUTO LED lighting is blue: When there is no wired source or only showing
wireless source
Ÿ HDMI LED lighting is blue: HDMI source is selected
Ÿ TYPE-C LED lighting blue: Type-C source is selected
Press Power button to mute/unmute video.
Note:
Ÿ Video mute is working whether the source is active or inactive;
Ÿ After pressing the power button again, video returns to the default status
(unmute).
Ÿ LED Lighting is blue: Video input signal is detected.
Ÿ LED Lighting is white: No video input signal is detected.
Ÿ LED Lighting is red: Video is muted.
Ÿ LED Lighting is "Breathing" and is white: Standby status. (Standby occurs
when no source is connected and wireless times out)
Press to set BYOD (AirPlay and Miracast) function to On/Off.
On/Off LED will light blue depending on selection.
Press to increase volume.
Press to mute/unmute the mics.
Press to decrease volume.
4 x Omnidirectional mics array for picking up sound.
Connect to HT-Voyager for pairing. (Plug in HT-Voyager and leave in until
HT-Voyager's LED becomes solid white – after about 20 seconds)
Connect to the power adapter provided.
Connect to a network device (e.g. network switch, router, computer, etc.) for
AirPlay Mirroring signal input and LAN control (Web GUI & Telnet API).
Connect to an HDBT receiver.
Connect to an HDMI display.
Ÿ HDMI IN: Connect to an HDMI source.
Ÿ USB-B: Connect to the USB host device using a mini USB to USB Type A
cable.
Note: USB-B is bound with HDMI IN.
Connect to a USB Device.
USB 3.1 Gen1: 5Gbps
USB PD: 60W Max
Page 7 of 30