Table of Contents
Advertisement
CHAPTER 1 INTRODUCTION
Chip Set:
·
The system board utilizes the Intel Pentium Pro Chipset which
includes SB82441FX (PMC) PCI bridge and memory controller, and
SB82442FX(DBX) Data Bus Accelerator and SB82371(P11X3) PCI
to ISA Bridge.
Multi-I/O:
·
The system board has a built in Plug and Play Winbond W83877
and Multi-I/O chipsets to support 2 high-speed serial ports, one
parallel port with ECP and EPP capabilities, and one floppy
drive.
Enhanced IDE Support:
·
A PCI IDE controller and built-in P11X3 supports dual channels
and four hard drives.
IrDA and PS/2 support:
·
This board supports an infrared port connector for wireless
interface and a jumperless PS/2 mouse connector.
USB support:
·
The system board supports a two channel USB port connector.
AHA SCSI BIOS:
·
This optional feature supports on-board an AHA AIC 7880 SCSI
controller.
Main Memory:
·
Supports four memory banks using four 72-pin SIMM sockets.
·
Up to 512 Mbytes main memory.
·
Supports Fast Page (FP) Mode, Extended Data Output (EDO)
Mode, and Burst Extended Data Output (BEDO) Mode
DRAM.
1 -
2
Advertisement
Table of Contents
