MSI MS-6104 User Manual page 61

Chapter 3 AWARD BIOS USER'S GUIDE
Secondary PCI IDE:
Onboard PCI SCSI Chip:
option
PCI Slot IDE 2nd Channel:
Onboard FDD Controller:
Onboard Serial Port 1:
Onboard Serial Port 2:
The system provides for a On-Board On-Chipset
PCI IDE controller that supports Dual Channel IDE
(Primary and Secondary). A maximum of 4 IDE
devices can be supported. If the user to install the
Off-Board PCI IDE controller (i.e. add-on cards),
the user
disabled. This will depend on which channel will
used for the Off-Board PCIIDE add-on card.
This item is optional. If your system board is
utilizing a SCSI chipset controller the Enabled
must be chosen in order for the SCSI hard disk to be
initialized. Otherwise choose Disabled.
Choosing Enabled will allow the system to access
the 2nd IDE channel without a device driver. If the
Off-Board PCI IDE add-on card is installed the 2nd
IDE channel will need to be used.
The system has an on-board Super I/O chip with a
FDD controller that supports 2 FDDs for 360K/720
K/1.2M/1.44M/2.8M. Choose "Enabled" to use the
on-board FDD controller for accessing the FDD.
Otherwise choose "Disabled" to use the off-board
FDD controller.
3 - 35
Enabled/Disabled
must choose which channels will be
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
Disabled/(3F8/IRQ4)/(2F8/IRQ3)/
(3E8/IRQ4)/(2E8/IRQ3)
Disabled/(3F8/IRQ4)/(2F8/IRQ3)/
(3E8/IRQ4)/(2E8/IRQ3)