Table of Contents
Advertisement
Chapter 3 AWARD BIOS USER'S GUIDE
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive
installed is 40 or 80 tracks. 360K type is 40 tracks while 720K,
1.2M and 1.44M are all 80 tracks.
Enabled
(default)
Disabled
Boot Up NumLock Status
The default value is On.
On (default)
Off
Boot Up System Speed
It selects the default system speed - the speed that the system
will run at immediately after power up.
High (default)
Low
BIOS searches for floppy disk drive to determine if
it is 40 or 80 tracks. Note that BIOS can not tell
from 720K, 1.2M or 1.44M drive type as they are
all 80 tracks.
BIOS will not search for the type of floppy disk
drive by track number. Note that there will not be
any warning message if the drive installed is 360K.
Keypad is number keys
Keypad is arrow keys
Set the speed to high
Set the speed to low
3 - 12
Advertisement
Table of Contents
