Safety Summary - Lexicon RV-8 Software Upgrade Instructions

SAFETY SUMMARY

The following general safety precautions must be observed during all phases of operation and service of this unit. Failure to comply with these
precautions or with specific warnings elsewhere in these instructions violates manufacturer safety standards and intended use of this unit.
Harman Specialty Group assumes no liability for failure to comply with these requirements.
GROUND THE INSTRUMENT
To minimize shock hazard, the component chassis and cabinet
must be connected to an electrical ground. The component is
equipped with a three-conductor AC power cord. The power cord
must be connected to either an approved three-contact electrical
outlet or a three-contact-to-two-contact adapter with the
grounding-wire (green) firmly connected to an electrical ground
(safety ground) at the electrical outlet.
ii
REFER ALL SERVICING TO QUALIFIED PERSONNEL
Servicing is required when the apparatus has been damaged in any
way, such as when the power cord or plug has been damaged;
liquid has been spilled or objects have fallen into the apparatus; or
the apparatus has been exposed to rain or moisture, does not
operated normally, or has been dropped.