Documentation Conventions - Lexicon MC-4 Software Upgrade Instructions

Introduction

DOCUMENTATION CONVENTIONS

This document contains software installation instructions for the MC-4 Digital Controller. Refer to the MC-4 User Guide for general safety,
installation, and operation instructions.
The following symbols are used in the document:
Appears on the component to indicate the
presence of uninsulated, dangerous voltage inside
the enclosu
constitute a risk of shock.
Appears on the component to indicate important
operating and maintenance instructions in the
accompanying documentation.
Calls attention to a procedure, practice, condition,
or the like that, if not correctly performed or
adhered to, could result in damage to circuit
boards from electrostatic discharge or improper
insertion.
iv
r ,
e voltage that may be sufficient to
Calls attention to a procedure, practice, condition
WARNING
or the like that, if not correctly performed or
adhered to, could result in injury or death.
Calls attention to a procedure, practice, condition
CAUTION!
or the like that, if not correctly performed or
adhered to, could result in damage or destruction
to part or all of the unit.
Calls attention to information that is essential to
Note:
highlight.
Lexicon