Table of Contents
Advertisement
Electromagnetic Environmental Recommendations
Recommended separation distances between portable and mobile RF communications
®
The HOTLINE
Warmer is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the HOTLINE
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the HOTLINE
to the maximum output power of the communications equipment.
Rated maximum
output power of
150 kHz to 80 MHz
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
.
structures, objects and people
Accessories
Product Description
L-70
HOTLINE
L-70NI
HOTLINE
L-80
HOTLINE
L-10
Gas Vent
PC-8
T-Connector, 20.3 cm (8") Patient Lead with Injection Port
YC-8
Y-Connector, 20.3 cm (8") Patient Lead with Injection Port
40
HOTLINE
S E C T I O N 1 3
equipment and the HOTLINE
Separation distance according to frequency of transmitter m
80 MHz to 800 MHz
d=[3.5/V1]P
0.116
0.368
1.16
3.69
11.66
Fluid Warming Set with Injection Port
Fluid Warming Set without Injection Port
Warming Set with L-10 Gas Vent
®
Blood and Fluid Warmer | Operator's Manual
•
S p e c i f i c a t i o n s a n d A c c e s s o r i e s
®
Warmer
®
Warmer can help prevent
®
Warmer as recommended below, according
800 MHz to 2.5 GHz
d=[3.5/E1]P
0.116
0.368
1.16
3.69
11.66
d=[7/E1]P
0.233
0.737
2.33
7.38
23.33
Advertisement
Table of Contents
