Table of Contents
Advertisement
Notices for Safety
Warning
Don't install in humid, oily, dusty places and direct-lighted, rainwater-reaching places and closed spaces.
It can cause an electric shock, and / or a fire.
Please use a grounded outlet for safety. Don't put to earth in a gas pipe, a plastic water pipe, a telephone wire only.
Otherwise, it can cause an electric shock, a fire, a trouble, an explosion, so please surely use the grounded outlet.
Please use the electric power source of an alternating current AC80~120V or 210~250V / 50~60Hz and solely the product of
the rated over 15A outlet, and don't extend the original electric cord.
In case of the extended electric cord along with the multi-tap or other equipments being used, it can cause an electric shock, and / or a fire.
Only if any transformer or inverter is used, it can cause an electric shock, a re. When switch on the AC power of transformer or inverter,
don't plug RPT-T300. Only after checking that you have a stable AC power source, then please plug RPT-T300.
Different voltage / frequency / rated current condition can cause an electric shock or a fire.
Please regularly wipe off well the power source plug terminal and the extraneous bodies(dust, water etc) at the contacting part with a
dried cloth
Unplug the power and wipe off with a dried cloth. If the power plug gets wet, it can cause an electric shock, a fire.
Don't bend the electric cord(electric wire) by force. Don't pull it. Don't twist it. Don't tie it up. Also, Don't hang it on the metal part.
Don't put it on the heavy object. Don't insert it among the objects. Don't push it into the back of the product.
It can cause an electric shock, a fire.
Surely connect the power plug to the end of the outlet, don't use the damaged power plug, the electric cord, the unstuck outlet.
It can cause an electric shock, a fire.
Connect the cord of the power plug down. Don't pull the electric cord(electric wire) when you unplug the power.
Otherwise, in case of connecting it, when the wire inside the cord is cut off, it causes an electric shock, a fire.
Hold and unplug the power plug because it can cause an electric shock, a fire.
Certainly exchange them not to be in danger before using the equipments when the power plug, the electric cord, the connecting cable
are damaged.
Don't touch and operate the equipment with wet hands.
It can cause an electric shock and the breakdown of a product.
Immediately interrupt the electric power source and connect the service center only if a strange sound, a burning smell, a smoke occur.
It can cause an electric shock, and / or fire
Connect the service center after unplugging the power only if any water or the extraneous bodies go into the electric parts inside the product.
It can cause an electric shock, and / or fire.
Don't open the case of the product with the power on. And don't disassemble, repair, remodel them absolutely at random except for a
serviceman.
Because of a high voltage flowing inside the product, in case of being exposed to the wave energy, there is some risk of an electric shock and a fire.
Please connect a service center and be advised to be helped from it, only if the repair of the product is needed.
Smoking and the operation of welding and grinding should be strictly prohibited near the battery, when the regeneration and the charge
are being operated.
Due to the occurrence of the hydrogen gas(sulfurous acid gas) in the battery, take care of the risk of an explosion when smoking and sparking operations are
being performed near around.
Put on glasses or goggles to protect the eyes and wear working clothes suitable for an operation, when the regeneration and the charge
are being operated
Immediately wash with water in case that an electrolyte splash in the eyes, take notice of the sulfuric acid ingredients in the electrolyte which hurt the
garments.
In case of not keeping the below notices,
the user can be killed and seriously injured.
Advertisement
Table of Contents
