Figure 5 - Network Card Configuration Step 3; Figure 6 - Cbw3 Network Connections - GE CSE Uniserve CB Watch 3 Operating Manual

In the window, select IPv4 IP address settings and click properties.
A new window (as shown below) will appear:
By default, the IP address of the CBW3 is set in the factory to: 192.168.5.22
But your particular IP address will have been set during the installation process. We will
use the default IP address here, purely as an example.
To communicate with the CBW3, you will need to set your network adapter to another
address on that network, for example: 192.168.5.30
The last number (30 in this example) could be between 1 and 254, except for 22 (which is
the CBW3 address)
To do that, select "Use the following IP address" and enter:
- The IP address
- The sub-net mask
You can leave the DNS server settings blank.
Then click OK.
Here is an example of a network connection layout. It is possible to have several CBW3
connected on the same network in a substation. Each CBW3 is addressed by using its own
unique IP address
MA-037 - CB Watch 3 Operating Manual
192.168.5.30
255.255.255.0
Figure 5 – Network card configuration step 3
Figure 6 – CBW3 network connections
v7.0 - May 2020 Page 13 of 118