Figure 9 - Connection Advanced Page; Figure 10 - Hmi Ssl Upload; Figure 11 - Hmi Cbw3 Log In - GE CSE Uniserve CB Watch 3 Operating Manual

Disregard and press the "Advanced" button which will reveal a "Proceed anyway" option.
Figure 9 – Connection advanced page
Please disregard the "unsafe" warning and proceed anyway to the IP address that you know
is the one you gave the CBW3.
Note 1: Depending on the browser used, it may be possible to save the IP address into your
browser and tell it that it is trusted so that the message will not appear next time.
Note 2: It is also possible to upload your own official secure SSL certificate into the CBW3
(that your network will recognise) to avoid this error message. This can be done in the
"System/Upload" page under the "Security" section:
Figure 10 – HMI SSL upload
For more detail, please refer to the CBW3 Installation Manual.
You will then get to the CBW3 welcome page which will ask you for authentication:
Figure 11 – HMI CBW3 log in
MA-037 - CB Watch 3 Operating Manual v7.0 - May 2020 Page 15 of 118