Integration With Perception Fleet Software; Figure 186 - Screenshot From Perception Fleet Software; Figure 187 - Enabling Modbus Protocol - GE CSE Uniserve CB Watch 3 Operating Manual

Integration with Perception Fleet software

Perception Fleet can regularly poll each CBWatch3 in your fleet and gather all the Risk Index
information from each circuit breaker in order to provide an overall view of your circuit
breaker fleet.
Perception will display the Risk Index information for each CB in your fleet and, if you want
to delve into more details, it will let you seamlessly open the individual CBWatch3 web HMI.
Figure 186 – Screenshot from Perception Fleet software
For more information about Perception, please consult the perception User Manual.
In order to be able to do that, you will need:
• CBWatch3 firmware v4.1 or greater
• Perception Fleet software v2.0 or greater
Furthermore, Perception relies on a Modbus connection to retrieve its data, so you will
need to enable the Modbus protocol in the CBWatch3 by ticking the box in:
HMI: System / Network
Note that if you are already using another Protocol (DNP3 or IEC 61850), two protocols can
be selected at once and adding Modbus is not a problem.
MA-037 - CB Watch 3 Operating Manual
Figure 187 – Enabling Modbus protocol
v7.0 - May 2020 Page 111 of 118