Operating Your Bosch Display Mount; Safety Instructions - Bosch BDU336Y Owner's Manual

English – 4

Operating your Bosch Display Mount

Read all the safety information and
instructions. Failure to observe the
safety information and follow instruc-
tions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and instructions for fu-
ture reference.
The contact surfaces of the display holder may
u
become very hot (> 140 °F). Allow the contact
surfaces to adjust to the ambient temperature
before you touch them. This is particularly impor-
tant when using a SmartphoneGrip.
Keep swallowable small parts away from small
u
children. There is a risk of serious injury.
Never short-circuit the pins. The display holder
u
may be irreparably damaged and must then be re-
placed.
Ensure that the contacts are free of dirt. By do-
u
ing this, you prevent malfunctions or damage.
After a fall, check the display holder for sharp
u
edges. Replace it if required.
Do not stand your bicycle upside down on its
u
saddle and handlebars if the on-board computer
or its holder protrude from the handlebars. This
may irreparably damage the on-board computer or
the holder. Also remove the on-board computer be-
fore placing the bicycle on a wall mount to ensure
that the on-board computer does not fall off or be-
come damaged.
Observe all national regulations which set out
u
the approved use of eBikes.
Read and observe the safety warnings and in-
u
structions in all operating instructions of the
eBike system and your eBike.
0 275 U07 3S1 | (08.06.2021)

Safety instructions

Bosch eBike Systems