Bosch BDU336Y Owner's Manual page 85

In order for the battery to be inserted, the key (1)
must be inserted into the lock (2) and the lock must
be open.
❶ To insert the PowerTube battery (4), place it so
that its contacts are in the lower holder of the
frame.
❷ Push the battery upwards until it is held by the
safety restraint (8).
❸ Hold the lock open with the key and press the
battery upwards until you hear it click into place.
Check that the battery is secure in all directions.
❹ Always secure the battery by closing the lock (2)
– otherwise the lock may open and the battery
may fall out of the holder.
Always remove the key (1) from the lock (2) after
locking it. This prevents both the key from falling out
and the battery from being removed by unauthorized
third parties when the eBike is not in use.
Bosch eBike Systems
Removing the PowerTube battery (axial)
(see figure C)
C
(2)
(3)
(11)
(1)
❶ To remove the PowerTube battery (12), open
the lock (2) using the key (1), remove the
key (1) and fold the locking mechanism (9) to
the side.
❷ Use the pull strap (10) to pull the battery (12)
out of the frame.
Note: As a result of varying designs, the battery may
need to be inserted and removed using a different
method. Read the eBike manufacturer's operating in-
structions.
English – 11
(12)
(9)
(10)
(10)
0 275 U07 3PX | (09.07.2021)