Bosch BDU336Y Owner's Manual page 84

English – 10
If the battery capacity is less than 5 %, all the LEDs on
the battery charge indicator (6) on the battery will go
out. The display function of the on-board computer,
however, will carry on working.
Once charging is complete, disconnect the battery
from the charger and the charger from the mains.
Inserting and removing the battery
Always switch off the battery and the eBike sys-
u
tem when inserting the battery into the holder
or removing it from the holder.
Removing the PowerTube battery (pivot)
(see figure A)
A
1
(1)
(4)
0 275 U07 3PX | (09.07.2021)
(2)
2
(8)
❶ To remove the PowerTube battery (4), open the
lock (2) using the key (1). The battery will be un-
locked and fall into the safety restraint (8).
❷ Press on the safety restraint from above. The
battery will be unlocked completely and fall into
your hand. Pull the battery out of the frame.
Note: As a result of varying designs, the battery may
need to be inserted and removed using a different
method. Read the eBike manufacturer's operating in-
structions.
Inserting the PowerTube battery (pivot)
(see figure B)
B
(1)
2
4
(2)
1
(4)
(2)
3
(4)
Bosch eBike Systems
(8)