Crosswater US-BSW0101 Installation Instructions

Basin Drains
US-BSW0101 / US-BSW0103
Installation Instructions
Introduction
This drain is designed for basin thickness ranges from 1 " to 1-3/4".
Please make sure the basin is the appropriate size as indicated.
NOTE:
US-BSW0101 - for basins without an overflow.
US-BSW0103 - for basins with an overflow.
US-BSW0103 basin waste
Tools required
Channel
locks
CLICKER PLUG
WASTE FLANGE
FOAM SEAL
BASIN
DRAIN
RUBBER GASKET
DRAIN BODY
FIBRE GASKET
RETAINING NUT
TAILPIECE
Plumbers' putty Adjustable
or caulking wrench
IMPORTANT: Please read these instructions carefully before
beginning and retain for future reference.
We do not accept responsibility for any problems that may occur
through incorrect installation.
US-BSW0101 basin waste
Flat head
screwdriver
CLICKER PLUG
WASTE FLANGE
FOAM SEAL
BASIN
DRAIN
RUBBER GASKET
DRAIN BODY
FIBRE GASKET
RETAINING NUT
TAILPIECE
Cross head Hexagonal
screwdriver key