Driver Position Memory System; Driver Position Memory System Reset - Hyundai LX2 Owner's Manual

Driver position memory system

reset
If the Driver position memory system
does not work properly, initialize the
system as follows.
How to initialize:
1. Stop the vehicle and open the dri-
ver's door with the ignition switch in
the ON position and the vehicle
shifted to P (Park).
2. Pull the driver's seat forward as far
as possible and have the seatback
upright as much as possible using
the driver's seat forward/backward
adjustment and seatback angle
(recline) switches.
3. Push the SET button and seat for-
ward movement switch for 2 sec-
onds simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will auto-
matically move backwards. The
alarm sound will continue while
the system is in operation.
3. Initialization will be complete after
the seat and seatback move to the
center with an alarm sound. If,
however, cases as follows occur,
the initialization process will come
to a stop and the alarm sound will
stop as well.
- When pushing driving position
memory system button
- When pushing driver's
height adjustment switch
- When driving speed exceeds 3 km/h
- When the driver's door is closed
CAUTION
•
If the reset is failed, initialize
the system once again.
•
Initialize the system after
cleaning the obstacles sur-
rounding of seat.
•
After completing the initializa-
tion, adjust the driver position
memory system again.
seat
3
3-25