Hyundai LX2 Owner's Manual page 358

BLIND-SPOT COLLISION WARNING (IF EQUIPPED)
System description
Blind-Spot Collision Warning
(BCW)
The Blind-Spot Collision Warning
System (BCW) uses radar sensors in
the rear bumper to monitor and warn
the driver of an approaching vehicle
in the driver's blind spot area.
1) Blind-Spot Area
The blind spot detection range varies
relative to vehicle speed.
Note that if your vehicle is traveling
much faster than the vehicles around
you, the warning will not occur.
2) Closing at high speed
OTM058120L
BCW system will alert you when it
detects a vehicle is approaching in
an adjacent lane at a high rate of
speed.
If the driver activates the turn signal
when the system detects an oncom-
ing vehicle, the system sounds an
audible alert.
OTM058121L
5
5-81