Hyundai LX2 Owner's Manual page 345

Table of Contents

Advertisement

Driving your vehicle
The warning light illumi-
nates on the LCD display,
when you cancel the FCA
system. The driver can
monitor the FCA ON/OFF status on
the LCD display. Also, the warning
light illuminates when the ESC
(Electronic
Stability
Control)
turned off. If the warning light
remains ON when the FCA is acti-
vated, we recommend that you have
the system checked by an authorized
HYUNDAI dealer.
• The driver can select the initial warn-
ing activation time on the LCD dis-
play.
Go to the "User Settings → Driver
assistance → Warning timing →
Normal/Later".
5-68
The options for the initial Forward
Collision Warning includes the fol-
lowing:
- Normal:
When this condition is selected,
the
initial
Forward
Warning is activated sensitively. If
is
you feel the warning activates too
early, set the Forward Collision
Warning to 'Later'.
Even though, 'Normal' is selected if
the front vehicle suddenly stops
the initial warning activation time
may not seem fast.
- Later:
When this condition is selected,
the
initial
Forward
Warning is activated later than nor-
mal. This setting reduces the
amount of distance between the
vehicle, ahead before the initial
warning occurs.
Select 'Later' when traffic is light
and when driving speed is slow.
❈ if you change the warning timing,
the warning timing of other sys-
tems may change.
Always be aware of warning tim-
ing before changing the warning
timing.
Prerequisite for activation
The FCA gets ready to be activated,
when the FCA is selected on the
LCD display, and when the following
prerequisites are satisfied.
Collision
- The ESC (Electronic Stability
Control) is on.
- Vehicle speed is over 8 km/h (5
mph)). (The FCA is only activated
within a certain speed range.)
- The system detects a vehicle in
front, which may collide with your
vehicle. (The FCA may not be acti-
vated or may sound a warning
alarm in accordance with the driv-
ing situation or vehicle condition. If
you select "Warning only", the FCA
Collision
system activates and produces
only warning alarms in accordance
with the collision risk levels.)

Advertisement

Table of Contents
loading

Table of Contents