Hyundai LX2 Owner's Manual page 197

When the High Beam Assist (HBA) is
operating, the high beam switches to
low beam in the following conditions.
- When the headlamp of an on-com-
ing vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
- When headlamp/tail lamp of bicy-
cle/motorcycle is detected.
- When the surroundings are bright
enough high beams are not needed.
- When streetlights or other lights
are detected.
- When the light switch is not in the
AUTO position.
- When the High Beam Assist (HBA)
is off.
- When vehicle speed is below 35 km/h
(22mph).
Warning light and message
When the High Beam Assist (HBA) is
not working properly, the warning
message will come on for a few sec-
ond. After the message disappears,
the master warning light (
minate.
We recommend that you take your
vehicle to an authorized HYUNDAI
dealer and have the system checked.
The system may not operate
normally in the following condi-
tions.
When the light from on-com-
ing or vehicle in front is dim
•
When the in light from the on-
coming or vehicle in front in is
not detected because of lamp
damage, hidden from sight,
OOS047127L
etc.
•
When the lamp of the on-com-
ing or vehicle in front is cov-
ered with dust, snow or water.
•
When the vehicle in front's
) will illu-
headlamps are off but the fog
lamps on and etc.
CAUTION
3-109
3