Hyundai LX2 Owner's Manual page 43

■ Front seat
■ Rear seat (2nd row)
While the engine is running, push
either of the switches to warm the dri-
ver's seat or front passenger's seat.
During mild weather or under condi-
tions where the operation of the seat
warmer is not needed, keep the
switches in the OFF position.
• Manual temperature control
Each time you push the switch, the
temperature setting of the seat is
changed as follows :
- Front seat / 2
→
OFF
LOW ( )
OLX2038031
• Automatic temperature control
The seat warmer starts to auto-
matically control the seat tempera-
ture in order to prevent low-tem-
perature burns after being manual-
ly turned ON.
- Front seat / 2
→
OFF
OLX2038076
LOW ( )
If HIGH temperature is manually
selected again, the temperature
will be controlled automatically.
• When pressing the switch for more
than 1.5 seconds with the seat
warmer operating, the seat warmer
will turn OFF.
nd row seat
HIGH ( )
MIDDLE ( )
row seat
nd
HIGH ( )
30 MIN
MIDDLE ( )
60 MIN
• The seat warmer defaults to the
OFF position whenever the ignition
switch is in the ON position.
However, if the Auto Comfort
Control function is ON, the driver's
seat warner will turn on and off
depending on the ambient temper-
ature.
• Auto Comfort Control
(for driver's seat) (if equipped)
The seat warmer automatically
controls the seat temperature
depending on the ambient temper-
ature when the engine is running. If
the seat warmer switch is pushed,
the seat warmer will have to be
controlled manually.
To use this function, it must be acti-
vated from the Settings menu in
the Audio / AVN system screen.
Select:
- All menus → Setup → Vehicle →
Heated / Ventilated Features
For more details, refer to the sep-
arately supplied manual with your
vehicle.
2
2-23