Hyundai LX2 Owner's Manual page 364

Table of Contents

Advertisement

If any of these conditions occur, the
light on the BCW switch and the sys-
tem will turn off automatically.
Turn off the BCW and RCCW/RCCA
system (if equipped) when a trailer or
carrier is installed.
- Press the BCW button (the indica-
tor on the button extinguish)
- Deactivate the RCCW/RCCA sys-
tem by deselecting
"User Settings → Driver assistance
→ Parking safety → Rear Cross
Traffic Safety" (if equipped)
If you use BCW system, remove a
trailer or carrier.
When the BCW canceled warning
message is displayed in the cluster,
check to make sure that the rear
bumper is free from any dirt or snow
in the areas where the sensor is
located. Remove any dirt, snow, or
foreign material that could interfere
with the radar sensors.
After any dirt or debris is removed,
the BCW should operate normally
after about 10 minutes of driving the
vehicle.
If the system still does not operate
normally, we recommend that you
have your vehicle inspected by an
authorized HYUNDAI dealer.
Check Blind-Spot Collision
Warning (BCW) system
If there is a problem with the BCW
system, a warning message will
appear and the light on the switch
will turn off. The system will turn off
automatically. We recommend that
you have your vehicle inspected by
an authorized HYUNDAI dealer.
OTM058151L
5
5-87

Advertisement

Table of Contents
loading

Table of Contents