Advertisement
3. Ensure that, on both sides of the mask, the neoprene material tucks inside of the leading edge
where the lens body and jaw frame meet.
This will permit proper removal and replacing of the Pod both above and below the water.
4. Stretch the pull tab away from the mask and over the apex of the lower jaw frame. Use the
nylon pocket to capture the apex of the jaw frame.
© MMXXII Kirby Morgan Dive Systems, Inc. All Rights Reserved
Kirby Morgan Dive Systems, Inc.
1430 Jason Way Santa Maria, California 93455
Phone: 805/928-7772
www.KirbyMorgan.com email: kmdsi@KirbyMorgan.com
Fax: 805/928-0342
Document #220323001
Page 3 of 8
®
Advertisement
