PIONEER DJ DDJ-FLX6-GT Instruction Manual page 86

Using Auto Loop
When you press a Performance Pad, a loop with the number of beats
assigned to the pad is set and the loop plays until you release the pad.
1 Press the [BEAT JUMP] mode button.
The unit enters Auto Loop mode.
2 Press a Performance Pad during playback.
Loop playback starts with the number of beats in the setting assigned to that
pad.
• When you press the same Performance Pad again, loop playback is
canceled.
Using Sampler
You can use the Performance Pads to play tracks or sounds assigned
to the Sampler slots.
1 Open the [SAMPLER] panel in Serato DJ Pro.
2 Press the [SAMPLER] mode button on the unit.
The unit enters Sampler mode.
3 Choose a Sampler bank on the Serato DJ Pro screen.
The sampler has 4 banks, A, B, C, and D, and each bank has 8 slots.
4 Drag and drop tracks or sounds to load them into the [SAMPLER]
panel's slots.
The sampler settings and loaded tracks are saved.
5 Press a Performance Pad.
The track or sound assigned to the relevant slot is played.
Serato DJ Pro
86
En