PIONEER DJ DDJ-FLX6-GT Instruction Manual page 66

• When using Jog Cutter without setting Hot Cues or a cue point, "scratch play"
starts from the cue point which is set at loading.
• Even if a Hot Cue or a cue point is set, "scratch play" starts from the current
playback position if [Jumps to the last played HOT CUE/CUE point.] isn't
selected in [Preferences] > [Controller] > [Deck] > [JOG CUTTER].
• You can also use a Hot Loop instead of a Hot Cue or a cue point.
2 Press the [JOG CUTTER] button.
Jog Cutter mode turns on.
• If Vinyl mode isn't turned on, turn it on before you press the [JOG CUTTER]
button.
• Jog Cutter mode can't be used on multiple decks at the same time. If you
press one [JOG CUTTER] button and then the other, the button that is
previously turned on will be turned off.
3 Hold the top of the jog wheel.
The playback position moves to the Hot Cue or cue point and "scratch play"
starts.
4 Move the jog wheel to start "scratch play".
When you move the jog wheel back and forth, you'll hear a professional-
sounding scratch effect applied to the sound.
• Different scratch effects are assigned to 6 areas of the jog wheel as follows.
The type of "scratch play" changes as you change the scratch area by
checking the indicator that appears when you touch the top of the jog wheel.
• When BPM is 150 or more, the scratch speed is halved. If you don't select
[While scratching, scratch tempo is half tempo if BPM is over
1
6 2
5 3
4
66
En
rekordbox