PIONEER DJ DDJ-FLX6-GT Instruction Manual page 53

Using Sample Scratch
Use this feature to take the track loaded into the sampler slot and load
it onto a deck.
1 Press the [SAMPLER] mode button while holding the [SHIFT]
button.
The unit enters Sample Scratch mode.
2 Press a Performance Pad.
The sound loaded in the sampler slot assigned to the pad is loaded onto the
deck so you can scratch with it and bend the pitch, etc.
• If the Play mode of the sampler slot is set to Oneshot, playback starts when
the sound is loaded to the deck.
• If the Play mode of the sampler slot is set to loop, manual loop is set on the
deck and playback starts when the sound is loaded to the deck.
• If the sampler slot is set to Gate, the sound plays as Cue Point Sampler while
holding the pad when the sound is loaded to the deck.
Sampler slots are set to the Performance Pads as follows. (The slots in
brackets are for when the Pad mode of deck 2 is set to Sample Scratch mode.)
1: Slot 1 (slot 9), 2: Slot 2 (slot 10), 3: Slot 3 (slot 11), 4: Slot 4 (slot 12),
5: Slot 5 (slot 13), 6: Slot 6 (slot 14), 7: Slot 7 (slot 15), 8: Slot 8 (slot 16)
To unload the track, press the Performance Pad while holding the [SHIFT]
button.
1 2 3
5 6 7
53
En
rekordbox
4
8