PIONEER DJ DDJ-FLX6-GT Instruction Manual page 85

Using Roll
If you press a Performance Pad when the unit is in Roll mode, a loop
with the number of beats assigned to the pad is set and the loop plays
until you release the pad.
During Loop Roll playback, normal playback with the original rhythm
continues in the background (but you can only hear the Loop Roll).
When you cancel Loop Roll, playback resumes from the position
reached in the background.
1 Press the [PAD FX] mode button.
The unit enters Roll mode.
2 Press and hold down a Performance Pad (1 through 8).
Loop Roll playback starts with the number of beats in the settings assigned to
that pad.
Playback continues in the background during Loop Roll playback (but you can
only hear the Loop Roll).
• Press the [CUE/LOOP CALL
Loop Roll to change the number of beats for the Loop Roll that's currently
playing.
For example, when you set the pads to 1/8 – 16 beats, the pad's settings are
as shown below.
1: 1/8 beat, 2: 1/4 beat, 3: 1/2 beat, 4: 1 beat,
5: 2 beats, 6: 4 beats, 7: 8 beats, 8: 16 beats
The range of beats set for Loop Roll is shown on the Serato DJ Pro screen.
3 Release the Performance Pad.
Loop Roll is canceled, and playback resumes from the position reached in the
background.
] or [CUE/LOOP CALL
1 2 3
5 6 7
85
En
Serato DJ Pro
] button during
4
8