Table of Contents
Advertisement
Clearing Pairing Information from a
●
Phone
iPhone Users
1. Y On the Home Screen, tap
"Settings" n "Bluetooth".
2. Y Next to "CASIO GBA-400", tap g.
3. Y Tap "Forget this Device".
This clears the watch's pairing
information from the phone.
Android Users
1. Y On the App screen tap: "Settings"
n "Bluetooth".
2. Y Tap j next to "CASIO GBA-400".
3. Y Tap "Unpair".
This clears the watch's pairing
information from the phone.
4. Y Scroll the status bar downwards
and open the notification panel.
5. Y Tap e (Bluetooth) to disable
Bluetooth, and then re-enable it.
Note
Note that the actual operation
●
you need to perform depends
on the type of phone you are
using. For details, see your
phone documentation.
Clearing Pairing Information from
●
the Watch
1. X Hold down the (C) button for about
two seconds.
2. X Press (C) five times to enter the
Setup Mode.
[SETUP] will appear on the display
followed by the watch device name.
Device name
Operation Guide 5413
3. X Hold down the (A) button for about
two seconds.
Clearing pairing information will
cause the message [NOT YET
PAIRED!] to scroll from right to left on
the watch display.
4. X Press (C) to return to the
Timekeeping Mode.
Connecting with Another Phone
You need to perform the operation below
whenever you buy a different phone or
when you want to establish a Bluetooth
connection with another phone.
1.
Clearing Pairing Info
2.
Pair the watch with the phone.
Connecting a Different Watch to a
Phone
You should perform the steps below
before pairing a different watch with the
phone, such as after you buy a new
watch.
Pairing the Watch with a Phone
●
1. Y In the upper right corner of the G-
SHOCK+ top screen, tap i to
display the "Connection settings"
screen.
2. Y Tap "Connect new watch".
3. Y Select the name of the watch you
want to connect to and then tap
"Next".
From this point, follow the
●
instructions that appear on your
phone's screen to complete the
pairing operation.
Connecting with a Watch that is
●
Already Paired
1. Y In the upper right corner of the G-
SHOCK+ top screen, tap i to
display the "Connection settings"
screen.
2. Y From the "Previously registered
watch" list, tap the name of the phone
you want to connect with.
3. Y Tap "Connect to this ***".
Follow the instructions that appear
●
on your phone's screen to
complete the connection
operation.
Important!
A phone can be connected with
●
only one watch at a time. To
connect to another watch, you
need to terminate the current
connection.
Watch Settings
While the watch is connected to a phone,
it will automatically adjust its date and
time settings to those of the phone. If the
watch is not connected to a phone, use
the procedure below to adjust its date
and time settings.
Getting ready
Perform this procedure in the
Timekeeping Mode. Use (C) to navigate
to the Timekeeping Mode.
Navigating Between Modes
l
Timekeeping Mode
7
Advertisement
Table of Contents
