Name Of Each Component; Head - Panasonic LP-RF Series Setup & Maintenance Manual

1-5 Name of Each Component

1-5-1 Head

1
1. Laser radiation indicator
The display that shows the status of laser radiation and the laser marker.
Laser marker status
Being in laser emitting
Laser pumping is completed and internal shutter opened
Laser pumping is completed and internal shutter closed
Laser pumping is in progress (uncompleted) and internal shutter opened
Laser pumping is in progress (uncompleted) and internal shutter closed
Laser in non-pumped state
WARNING
2. Signal connector: SIGNAL
This is the terminal for communicating between head and controller.
Connect the attached signal cable.
• To ensure the ingress protection (IP64) of the head, install the attached connector cover to the cable. Refer to
"Installing connector cover to cable" (P.48).
3. Power connector: POWER
This is the connector for supplying the power to the head.
Connect the attached unit power cable.
• To ensure the ingress protection (IP64) of the head, install the attached connector cover to the cable. Refer to
"Installing connector cover to cable" (P.48).
7 5, 6
• If the laser emission indicator is placed out of the sight of operators, place
the external indicator light or warning lamp on the immediately apparent
place on the system.
ME-LPRF-SM-11
10
4
9
8
Head LED status
Orange lighted-up
Green lighted-up
White lighted-up
Green flashing
White flashing
Lights-out
2
3
29